Adjustment component for grille box

The regulation element has seven settings and can be set by turning and clicking the inner element.

Clamp for Sonoflex Ø60 mm - Ø215 mm

Combox (10 connectors)

The distribution manifold gather the tubes with supply and extract air and carry the air to and from the ventilation unit. The connection between the unit and the distribution box can be made using a Soundflex connector. Soundflex is a flexible...

Combox (6 connectors)

The distribution manifold gather the tubes with supply and extract air and carry the air to and from the ventilation unit. The connection between the unit and the distribution box can be made using a Soundflex connector. Soundflex is a flexible...

Cooker hood filter box

Duct-to-duct connector (Ø75)

Used to connect tubes, in the cases where there is a need to extend a tube.

Duct-to-duct connector (Ø90)

Used to connect tubes, in the cases where there is a need to extend a tube.

EM-box

The EM-box can be connected to Nilan’s ventilation units. An EM- box enables heat recovery via the home’s cooker hood, utilising the heat generated from cooking. When the cooker hood is switched off, the basic ventilation takes place via the...

End cap (Ø75)

To seal any unused connectors in the distribution box. The cover can also be used to protect from building dust and rain water when mounted on tubes or distribution boxes.

High box for grille with telescopic part (300x60 - 1 connector)

Supply air boxes for grille can be mounted in ceilings, walls or floors.

High box for grille with telescopic part (500x60 - 2 connectors)

Supply air boxes for grille can be mounted in ceilings, walls or floors.

High box for grille with telescopic part (500x60 - 3 connectors)

Supply air boxes for grille can be mounted in ceilings, walls or floors.

KI - Air supply valve Ø100

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KI - Air supply valve Ø125

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KIR - Air supply valve Ø100

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KIR - Air supply valve Ø125

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KU - Extraction valve Ø100

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KU - Extraction valve Ø125

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

Low box for grille with telescopic part (300x60 - 1 connector)

Supply air boxes for grille can be mounted in ceilings, walls or floors. The size matches a brick section for mounting in a brick wall. The robust materials make them suitable for embedding without any risk of deformation.

Low box for grille with telescopic part (500x60 - 2 connectors)

Supply air boxes for grille can be mounted in ceilings, walls or floors. The size matches a brick section for mounting in a brick wall. The robust materials make them suitable for embedding without any risk of deformation.

Low box for grille with telescopic part (500x60 - 3 connectors)

Supply air boxes for grille can be mounted in ceilings, walls or floors. The size matches a brick section for mounting in a brick wall. The robust materials make them suitable for embedding without any risk of deformation.

Low box for valve (Ø100 - 1 connector)

Supply air boxes for mounting of valves for the supply air into a room. The valves are available in white-painted metal.

Low box for valve (Ø100 - 2 connector)

Supply air boxes for mounting of valves for the supply air into a room. The valves are available in white-painted metal.

Low box for valve (Ø125 - 3 connector)

Supply air boxes for mounting of valves for the supply air into a room. The valves are available in white-painted metal.

NilAIR grille (Int. 300x50/Ext. 330x75 mm)

The supply air grille has a 2 mm high and 15 mm wide frame with a straight edge.

NilAIR grille (Int. 500x50/Ext. 530x75 mm)

The supply air grille has a 2 mm high and 15 mm wide frame with a straight edge.

NilAIR tube (Ø75 mm - 50 m)

A flexible solution to carry the supply air and extract air around the home.

NilAIR tube (Ø90 mm -50 meter)

A flexible solution to carry the supply air and extract air around the home.

Sonoflex silencing (CT150, CT200 )

Ø133 mm - 6 m

Sonoflex silencing Ø168 mm- 10 m

For easy fitting and excellent noise attenuation between the system and the distribution box and/or between the system and roof vents.

Sonoflex silencing (450)

Ø203 mm - 8 m

Sonoflex silencing (Ø108 mm, 6m)

Flexible duct connection, with thermal-acoustic insulation.A simpel and easy connection between the unit and distribution manifolds. Is also useable between the unit and discharge air and outdoor air intake. The perforated internal duct allows the...

Steel filter for filter box and EM-box

Supply air boxes for valve above door (Ø125 - 2 connectors)

Supply air boxes for mounting of valves to the supply air above a door.

Supply air boxes for valve above door (Ø125 - 3 connectors)

Supply air boxes for mounting of valves to the supply air above a door.

Unibox (12 connectors)

The distribution manifold gather the tubes with supply and extract air and carry the air to and from the ventilation unit. The connection between the unit and the distribution box can be made using a Soundflex connector. Soundflex is a flexible...

Unibox (8 connectors)

The distribution manifold gather the tubes with supply and extract air and carry the air to and from the ventilation unit. The connection between the unit and the distribution box can be made using a Soundflex connector. Soundflex is a flexible...