EM-box

The EM-box can be connected to Nilan’s ventilation units. An EM- box enables heat recovery via the home’s cooker hood, utilising the heat generated from cooking. When the cooker hood is switched off, the basic ventilation takes place via the...

Supply air boxes for valve above door (Ø125 - 2 connectors)

Supply air boxes for mounting of valves to the supply air above a door.

NilAIR tube (Ø90 mm -50 meter)

A flexible solution to carry the supply air and extract air around the home.

High box for grille with telescopic part (500x60 - 3 connectors)

Supply air boxes for grille can be mounted in ceilings, walls or floors.

Steel filter for filter box and EM-box

Sonoflex silencing (Ø108 mm, 6m)

Flexible duct connection, with thermal-acoustic insulation.A simpel and easy connection between the unit and distribution manifolds. Is also useable between the unit and discharge air and outdoor air intake. The perforated internal duct allows the...

NilAIR grille (Int. 500x50/Ext. 530x75 mm)

The supply air grille has a 2 mm high and 15 mm wide frame with a straight edge.

NilAIR grille (Int. 300x50/Ext. 330x75 mm)

The supply air grille has a 2 mm high and 15 mm wide frame with a straight edge.

Adjustment component for grille box

The regulation element has seven settings and can be set by turning and clicking the inner element.

Low box for grille with telescopic part (500x60 - 3 connectors)

Supply air boxes for grille can be mounted in ceilings, walls or floors. The size matches a brick section for mounting in a brick wall. The robust materials make them suitable for embedding without any risk of deformation.

Low box for grille with telescopic part (500x60 - 2 connectors)

Supply air boxes for grille can be mounted in ceilings, walls or floors. The size matches a brick section for mounting in a brick wall. The robust materials make them suitable for embedding without any risk of deformation.

Low box for grille with telescopic part (300x60 - 1 connector)

Supply air boxes for grille can be mounted in ceilings, walls or floors. The size matches a brick section for mounting in a brick wall. The robust materials make them suitable for embedding without any risk of deformation.

High box for grille with telescopic part (500x60 - 2 connectors)

Supply air boxes for grille can be mounted in ceilings, walls or floors.

High box for grille with telescopic part (300x60 - 1 connector)

Supply air boxes for grille can be mounted in ceilings, walls or floors.

KIR - Air supply valve Ø125

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KIR - Air supply valve Ø100

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KI - Air supply valve Ø125

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KI - Air supply valve Ø100

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KU - Extraction valve Ø125

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

KU - Extraction valve Ø100

NilAIR valves are barely visible in the room. They have a low height, thus giving a good quanda effect.

Supply air boxes for valve above door (Ø125 - 3 connectors)

Supply air boxes for mounting of valves to the supply air above a door.

Low box for valve (Ø125 - 3 connector)

Supply air boxes for mounting of valves for the supply air into a room. The valves are available in white-painted metal.

Low box for valve (Ø100 - 2 connector)

Supply air boxes for mounting of valves for the supply air into a room. The valves are available in white-painted metal.

Low box for valve (Ø100 - 1 connector)

Supply air boxes for mounting of valves for the supply air into a room. The valves are available in white-painted metal.

Combox (10 connectors)

The distribution manifold gather the tubes with supply and extract air and carry the air to and from the ventilation unit. The connection between the unit and the distribution box can be made using a Soundflex connector. Soundflex is a flexible...

Combox (6 connectors)

The distribution manifold gather the tubes with supply and extract air and carry the air to and from the ventilation unit. The connection between the unit and the distribution box can be made using a Soundflex connector. Soundflex is a flexible...

Unibox (12 connectors)

The distribution manifold gather the tubes with supply and extract air and carry the air to and from the ventilation unit. The connection between the unit and the distribution box can be made using a Soundflex connector. Soundflex is a flexible...

Unibox (8 connectors)

The distribution manifold gather the tubes with supply and extract air and carry the air to and from the ventilation unit. The connection between the unit and the distribution box can be made using a Soundflex connector. Soundflex is a flexible...

Duct-to-duct connector (Ø90)

Used to connect tubes, in the cases where there is a need to extend a tube.

End cap (Ø75)

To seal any unused connectors in the distribution box. The cover can also be used to protect from building dust and rain water when mounted on tubes or distribution boxes.

Duct-to-duct connector (Ø75)

Used to connect tubes, in the cases where there is a need to extend a tube.

NilAIR tube (Ø75 mm - 50 m)

A flexible solution to carry the supply air and extract air around the home.

VPL15 Cooling (Air supply Left)

The VPL 15/VPL15 Top M2 comprises of active ventilation- and heat recovery systems which extracts hot, humid air out of the home and uses its energy to heat or cool the fresh air. The VPL 15 / VPL 15 Top M2 comprises the following:  ...

Compact P Cooling GEO9

The ground source heat pumps are available as a compact unit installed in the Compact P system for connection of brine loop and central heating loop at inflow temperatures of up to 45 °C. The heat pump is equipped with a variable speed compressor...

Comfort CT150 (Air supply Right) - with CTS602 control

Comfort CT150 is a passive house certified and an energyefficient ventilation system with heat recovery for homes with a ventilation requirement up to 175 m3/h. The system’s compact design makes it ideal to use in new and refurbished flats,...

Comfort 300LR - with CTS602 control

Comfort 300 LR is for anyone who wants ventilation with highly efficient heat recovery and comfort heating. These systems extract hot, humid air from e.g. the kitchen, bathroom and utility room, at the same time removing dust particles, moisture and...

Electric heating element 1.2 kW

The electric heating elements are installed in the air distribution system. The capacities vary from 0.6 to 3 kW, and the elements are controlled with CTS 602. The electric heating element is provided with a safety thermostat,  temperature...

Pollen Filter ISO ePM1 65-80% (F7) panel filter Comfort CT300

Cassette filter ISO Coarse >90% (G4) (1 piece)Comfort CT300

Filter set with frame ISO Coarse >90% (G4) (2 pieces)Comfort CT300

Filter sheet ISO Coarse >90% (G4) (1 box = 8 pc.) Comfort CT300

Pollen Filter ISO ePM1 65-80% (F7) panel filter Comfort CT150 / CT200

Filter sheet ISO Coarse >90% (G4) (1 box = 8 pc.) Comfort CT150 / CT200

Comfort 450 (Air supply Left)- with CTS602 control

Comfort 450 is for anyone who wants ventilation with highly efficient heat recovery and comfort heating. These systems extract hot, humid air from e.g. the kitchen, bathroom and utility room, at the same time removing dust particles, moisture and...

Comfort 450 (Air supply Right)- with CTS602 control

Comfort 450 is for anyone who wants ventilation with highly efficient heat recovery and comfort heating. These systems extract hot, humid air from e.g. the kitchen, bathroom and utility room, at the same time removing dust particles, moisture and odours...

Comfort CT300 Polar (Air supply Right) - with CTS602 control

Comfort CT300 is a passive house certified and an energy- efficient ventilation system with heat recovery for homes  with a ventilation requirement up to 400 m3/h. Comfort CT300 comprises the following: •  Counterflow heat exchanger for...

Comfort CT300 (Air supply Right) - with CTS602 control

Comfort CT300 is a passive house certified and an energy- efficient ventilation system with heat recovery for homes  with a ventilation requirement up to 400 m3/h. Comfort CT300 comprises the following: •  Counterflow heat exchanger for...

Comfort 302 Top Polar (Air supply Left) - with CTS602 control

The Comfort 302 Top is an energy-efficient ventilation unit with heat recovery for homes and smaller commercial buildings with a ventilation requirement of up to 345 m3/h. Comfort 302 Top is a system with compact dimensions, fitting into standard...

Comfort 302Top Polar (Air supply Left) - with CTS602 control

The Comfort 302 Top is an energy-efficient ventilation unit with heat recovery for homes and smaller commercial buildings with a ventilation requirement of up to 345 m3/h. Comfort 302 Top is a system with compact dimensions, fitting into standard...

Comfort 302 Top (Air supply Right) - with CTS602 control

The Comfort 302 Top is an energy-efficient ventilation unit with heat recovery for homes and smaller commercial buildings with a ventilation requirement of up to 345 m3/h. Comfort 302 Top is a system with compact dimensions, fitting into standard...

Comfort 302 Top Polar (Air supply Left) - with CTS150 control

The Comfort 302 Top is an energy-efficient ventilation unit with heat recovery for homes and smaller commercial buildings with a ventilation requirement of up to 345 m3/h. Comfort 302 Top is a system with compact dimensions, fitting into standard...

Comfort 302 Top (Air supply Left) - with CTS150 control

The Comfort 302 Top is an energy-efficient ventilation unit with heat recovery for homes and smaller commercial buildings with a ventilation requirement of up to 345 m3/h. Comfort 302 Top is a system with compact dimensions, fitting into standard...